Timer Parameter


TIMER PARAMETER

T3103   -           Handover command

T100     -           RLT is the timer for holding of call if SACCH multiframe is not decoded than RLT
                         timer is start and if  RLT is reach is zero than call will disconnected.
                         Default value of this  timer is 28.
T3105     -          Time between repetitions of physical information to MS. Will be repeated NY1 times.
                         Recommend Value 8   (1 = 10MiliSecond)
T3124   -           Handover access

T3212     -         Location Update parameter

T3107     -         Assignment command
T3113     -         This timer is start after PAGING REQUEST and stop before paging response.
T3260    -          The timer is started when AUTHENTICATION REQUEST is sent from MSC.
                        The timer is stopped when AUTHENTICATION RESPONSE is received in MSC.
T3101     -         The BSS allocates a SDCCH, if available, and sends a IMMEDIATE ASSIGNMENT message on the downlink. This message contains the details of allocated SDCCH, TSC, and TA etc.   As soon as the BSS allocates and sends message on the AGCH, it starts a timer T3101.  This timer is set in millisecs.
T3110     -       On the receipt of the channel release, the MS starts internal timer T3110 and disconnects the main signalling link.
T3111      -       When T3111 has expired all RF links are terminated.

1 comment:

Anonymous said...

Bangalore could be a no professional location by way of latest times as many of us originating from outsde city will be crowding progressively.