Parameter
ID |
Parameter Name |
Recommended
Value |
SAMULFRM |
SACCH
Multi-Frames |
32 |
RACHBUSYTHRED |
RACH
Busy Threshold |
16 |
PAGTIMES |
Paging
Times |
4 |
ASSLOADJUDGEEN |
Assignment
Cell Load Judge Enable |
DISABLE |
DTLOADTHRED |
Directed
Retry Load Access Threshold |
85 |
AFRSAMULFRM |
AFR
SACCH Multi-Frames |
48 |
AHRSAMULFRM |
AHR
SACCH Multi-Frames |
32 |
AFRDSBLCNT |
AFR
Radio Link Timeout |
64_Times |
AHRDSBLCNT |
AHR
Radio Link Timeout |
52_Times |
MSMAXRETRAN |
MS
MAX Retrans |
4_Times |
COMMACC |
Common
Access Control Class |
L0_FORBID-0&L1_FORBID-0&L2_FORBID-0&L3_FORBID-0&L4_FORBID-0&L5_FORBID-0&L6_FORBID-0&L7_FORBID-0&L8_FORBID-0&L9_FORBID-0 |
SPECACC |
Special
Access Control Class |
L11_FORBID-0&L12_FORBID-0&L13_FORBID-0&L14_FORBID-0&L15_FORBID-0 |
ERGCALLDIS |
Emergency
Call Disable |
NO |
RLT |
Radio
Link Timeout |
52_Times |
ECSC |
ECSC |
1.
For a 900/1800 MHz Co-BCCH cell, it is recommended that this parameter be set
to Yes.
2. For a 1800 MHz cell in the
dual-band network, it is recommended that this parameter be set to Yes.
For other cells in the dual-band
network, it is recommended that this parameter be set to No. 3. When the
A5/4-7 encryption algorithm is used, it is
recommended that this parameter be set to Yes. 4.
When frequencies of the extended
frequency band exist on a 900 MHz cell, it is recommended that this parameter be set to Yes. |
MBR |
Multi-band
report |
If
the traffic volume on each frequency band is even and there is no special
requirements for the frequency band, the recommended value is 0; if the
traffic volume on each frequency band is significantly uneven and a frequency
band is preferred for an MS, the recommended value is 3; if traffic volume on
each frequency band is not extremely uneven, the recommended value is 1 or 2.
For details, see the GSM Rec. 05. 08. |
REASSEN |
Allow
Reassign |
YES |
EMLPPEN |
Allow
EMLPP |
NO |
REPEATDLFASET |
Repeated
Downlink FACCH |
NO |
REPEATDLFATHRED |
Repeated
Downlink FACCH Threshold |
5 |
REPEATSASET |
Repeated
SACCH |
NO |
ACCCTRLEN |
Access
Control Allowed |
NO |
ACCCTRLPY |
Access
Control Policy |
None |