| Parameter ID | Parameter Name | Recommended Value |
| HOCTRLSWITCH | Current HO Control Algorithm | HOALGORITHM1 |
| COBSCMSCADJEN | Co-BSC/MSC Adj | YES |
| SIGCHANHOEN | SDCCH HO Allowed | NO |
| INTRACELLHOEN | Intracell HO Allowed | In the hot-spot areas, densely populated urban areas, urban areas, suburbs, and rural areas, the recommended value is YES; in the high-speed circumstances, the recommended value is NO. |
| INTRACELLFHHOEN | Intracell F-H HO Allowed | YES |
| LoadHoEn | Load Handover Support | NO |
| QCKMVHOEN | MS Fast Moving HO Allowed | Set this parameter to YES only in special scenarios such as highways. |
| RXQCKFALLHOEN | Rx_Level_Drop HO Allowed | In dual-band networking mode for densely populated urban areas, the level drops rapidly due to multiple barriers. The propagation loss of the 1800 MHz frequency band is greater than the propagation loss of the 900 MHz frequency band. Considering the preceding factors, you can set this parameter to YES for the DCS1800 cell. Under normal conditions, set this parameter to No. |
| PBGTHOEN | PBGT HO Allowed | YES |
| LEVHOEN | Level HO Allowed | YES |
| FRINGEHOEN | Edge HO Allowed | YES |
| BQHOEN | BQ HO Allowed | YES |
| TAHOEN | TA HO Allowed | YES |
| CONHOEN | Concentric Circles HO Allowed | NO |
| INTERFHOEN | Interference HO Allowed | YES |
| ULEDGETHRES | Edge HO UL RX_LEV Threshold | 10 |
| DLEDGETHRES | Edge HO DL RX_LEV Threshold | The
recommended value is 20 when HUAWEI I Handover is used; The recommended value is 15 when HUAWEI II Handover is used. |
| EDGESTAT | Handover Algorithm II Edge HO Watch Time | 1 |
| EDGELAST | Handover Algorithm II Edge HO Valid Time | 1 |
| INFHHOSTAT | Intracell F-H HO Stat Time | 10 |
| INFHHOLAST | Intracell F-H HO Last Time | 8 |
| INHOF2HTH | F2H HO Threshold | 25 |
| INHOH2FTH | H2F HO Threshold | 12 |
| HOTHRES | Inter-layer HO Threshold | 25 |
| LEVHOHYST | Inter-layer HO Hysteresis | 2 |
| HOCDCMINUPPWR | Min UL Level on Candidate Cell | 0 |
| HOCDCMINDWPWR | Min DL Level on Candidate Cell | 10 |
| TIGHTBCCHHOSTATTIME | TIGHT BCCH HO Watch Time | 6 |
| TIGHTBCCHHOLASTTIME | TIGHT BCCH HO Valid Time | 4 |
| QUICKHOEN | Quick Handover Enable | NO |
| ATCBHOEN | Concentric Circles ATCB HO Allowed | NO |
| INTERFERESTATTIME | Interfere HO Static Time | 3 |
| INTERFERELASTTIME | Interfere HO Valid Time | 2 |
| BETTERCELLHOEN | Better Cell Handover Enable | YES |
| AMRFULLTOHALFHOALLOW | AMR F-H Ho Allowed | NO |
| AMRFULLTOHALFHOTHRESH | AMR F-H Traffic Threshold | 75 |
| FULLTOHALFHODURATION | F-H Ho Duration | 5 |
| FULLTOHALFHOPERIOD | F-H Ho Period | 1 |
| AMRFULLTOHALFHOPATHADJSTEP | AMR F-H Ho Pathloss Adjust Step | 1 |
| AMRFULLTOHALFHOATCBADJSTEP | AMR F-H Ho ATCB Adjust Step | 2 |
| AMRFULLTOHALFHOPATHTHRESH | AMR F-H Ho Pathloss Threshold | 100 |
| FULLTOHALFHOPATHOFFSET | F-H Pathloss Offset Overlay | 10 |
| AMRFULLTOHALFHOATCBTHRESH | AMR F-H Ho ATCB Threshold | 20 |
| FULLTOHALFHOATCBOFFSET | F-H ATCB Offset Overlay | 20 |
| AMRFULLTOHALFHOQUALTHRESH | AMR F-H Ho Qual. Threshold | 0 |
| FULLTOHALFHOSTATTIME | F-H Ho Stat. Time | 6 |
| FULLTOHALFHOLASTTIME | F-H Ho Last Time | 4 |
| AMRHALFTOFULLHOTHRESH | AMR H-F Traffic Threshold | 15 |
| AMRHALFTOFULLHOQUALALLOW | Allow AMR H-F Quality-based HO | NO |
| HALFTOFULLHODURATION | H-F Ho Duration | 5 |
| AMRHALFTOFULLHOATCBTHRESH | AMR H-F Ho ATCB Threshold | 4 |
| HALFTOFULLATCBOFFSET | H-F ATCB Offset Overlay | 20 |
| AMRHALFTOFULLHOPATHTHRESH | AMR H-F Ho Pathloss Threshold | 108 |
| HALFTOFULLHOPATHOFFSET | H-F Pathloss Offset Overlay | 10 |
| AMRHALFTOFULLHOQUALTHRESH | AMR H-F Ho Qual. Threshold | 3 |
| HALFTOFULLHOSTATTIME | H-F Ho Stat. Time | 6 |
| HALFTOFULLHOLASTTIME | H-F Ho Last Time | 4 |
| NOAMRFULLTOHALFHOALLOW | Non-AMR F-H Ho Allowed | NO |
| NOAMRFULLTOHALFTHRESH | Non-AMR F-H Traffic Threshold | 85 |
| NOAMRFULLTOHALFHOPATHADJSTEP | Non-AMR F-H Ho Pathloss Adjust Step | 1 |
| NOAMRFULLTOHALFHOATCBADJSTEP | Non-AMR F-H Ho ATCB Adjust Step | 2 |
| NOAMRFULLTOHALFHOPATHTHRESH | Non-AMR F-H Ho Pathloss Threshold | 95 |
| NOAMRFULLTOHALFHOATCBTHRESH | Non-AMR F-H Ho ATCB Threshold | 30 |
| NOAMRFULLTOHALFHOQUALTHRESH | Non-AMR F-H Ho Qual. Threshold | 0 |
| NOAMRHALFTOFULLTHRESH | Non-AMR H-F Traffic Threshold | 25 |
| NOAMRHALFTOFULLHOQUALALLOW | Allow Non-AMR H-F Quality-based HO | NO |
| NOAMRHALFTOFULLHOATCBTHRESH | Non-AMR H-F Ho ATCB Threshold | 14 |
| NOAMRHALFTOFULLHOPATHTHRESH | Non-AMR H-F Ho Pathloss Threshold | 103 |
| NOAMRHALFTOFULLHOQUALTHRESH | Non-AMR H-F Ho Qual. Threshold | 2 |
| INTERRATOUTBSCHOEN | Inter-RAT Out BSC Handover Enable | NO |
| INTERRATINBSCHOEN | Inter-RAT In BSC Handover Enable | NO |
| InterRatIurgInBscHoEn | Allow Incoming BSC Handover at Iur-g | NO |
| InterRatIurgVoiceCarryEn | Carry Speech Data at Iur-g | NO |
| INTERRATCELLRESELEN | Inter-RAT Cell Reselection Enable | NO |
| PATHLOSSHOEN | Pathloss Ho. Enable | NO |
| EDGESTAT1 | Handover Algorithm I Edge HO Watch Time | 6 |
| EDGELAST1 | Handover Algorithm I Edge HO Valid Time | 4 |
| LTECELLRESELEN | LTE Cell Reselection Allowed | NO |
| SRVCCHOEN | SRVCC Handover Allowed | NO |