| Parameter ID | Parameter Name | Recommended Value |
| LAYER | Layer of The Cell | 3 |
| PRIOR | Cell Priority | None |
| MAXTA | Max TA | In Normal cell,the recommended value is 62;in Double Timeslot Extension Cell,the recommended value is 219. |
| FRDLDTX | FR Use Downlink DTX | YES |
| HRDLDTX | HR Use Downlink DTX | YES |
| ENCRY | Encryption Algorithm | A5/0-1&A5/1-0&A5/2-0&A5/3-0&A5/4-0&A5/5-0&A5/6-0&A5/7-0 |
| RXMIN | Minimum Access RXLEV | 8 |
| FRULDTX | FR Uplink DTX | Shall_Use |
| HRULDTX | HR Uplink DTX | Shall_Use |
| CALLRESTABDIS | Call Reestablishment Forbidden | If this parameter is set to NO, the average call drop rate decreases. This setting is applicable in suburbs or urban areas with poor coverage. Call reestablishment, however, may take a long time. Therefore, the subscriber may hang up the phone before the call is re-established. Generally, the recommended value is YES. |
| IMMASSEN | TCH Immediate Assignment | NO |
| DIRECTRYEN | Directed Retry | YES |
| UPPCEN | UL PC Allowed | YES |
| DNPCEN | DL PC Allowed | YES |
| SDDYN | SDCCH Dynamic Allocation Allowed | YES |
| LEVELRPT | Level Report Switch | The
default value for the BTS30, BTS312, BTS3012A, or BTS3006A is YES, which can
be modified. The default value for other types of BTS is NONE, which cannot be modified. |
| CELL8PSKPOWERLEVEL | Cell 8PSK Power Attenuation Grade | 0 |
| FASTCALLTCHTHRESHOLD | Fast Call Setup TCH Usage Threshold | 0 |
| IMMASSCBB | Immediate Assignment Optimized | NO |
| NBAMRTFOSWITCH | TFO Switch | DISABLE |
| RTPSWITCH | Measure Link Delay Switch | DISABLE |
| HIGHMODPWREN | High-Order Modulation Power Increase Allowed | NOT_ALLOWED |
| UPGRADELEV8PSK | Power Increase in 8PSK | 18 |
| UPGRADELEVQPSK | Power Increase in QPSK | 32 |
| UPGRADELEVLSR16QAM | Power Increase in LSR 16QAM | 35 |
| UPGRADELEVLSR32QAM | Power Increase in LSR 32QAM | 19 |
| UPGRADELEVHSR16QAM | Power Increase in HSR 16QAM | 36 |
| UPGRADELEVHSR32QAM | Power Increase in HSR 32QAM | 40 |