| Parameter ID | Parameter Name | Recommended Value |
| SYSFLOWLEV | System Flux Threshold for Load HO | 10 |
| TRIGTHRES | Load HO Threshold | 90 |
| LoadAccThres | Load handover Load Accept Threshold | 80 |
| LOADOFFSET | Load HO Bandwidth | If "Current HO Control Algorithm" in "SET GCELLHOBASIC" is set to HOALGORITHM1, the recommended value of this parameter is 25. If "Current HO Control Algorithm" in "SET GCELLHOBASIC" is set to HOALGORITHM2, the recommended value of this parameter is 8. |
| LOADHOPERIOD | Load HO Step Period | If "Current HO Control Algorithm" in "SET GCELLHOBASIC" is set to HOALGORITHM1, the recommended value of this parameter is 10. If "Current HO Control Algorithm" in "SET GCELLHOBASIC" is set to HOALGORITHM2, the recommended value of this parameter is 5. |
| LOADHOSTEP | Load HO Step Level | If "Current HO Control Algorithm" in "SET GCELLHOBASIC" is set to HOALGORITHM1, the recommended value of this parameter is 5. If "Current HO Control Algorithm" in "SET GCELLHOBASIC" is set to HOALGORITHM2, the recommended value of this parameter is 2. |
| QCKSTATCNT | MS Fast-moving Watch Cells | 3 |
| QCKTRUECNT | MS Fast-moving Valid Cells | 2 |
| QCKTIMETH | MS Fast-moving Time Threshold | 15 |
| MAXCNTNUM | MAX Consecutive HO Times | 3 |
| BANTIME | Forbidden time after MAX Times | 20 |
| CONTINTV | Interval for Consecutive HO Jud. | 6 |
| SPEEDPUNISH | Penalty on MS Fast Moving HO | 30 |
| SPEEDPUNISHT | Penalty Time on Fast Moving HO | 40 |
| KBIAS | K Bias | 0 |
| TIGHTBCCHRXQUALTHRES | RX_QUAL Threshold for TIGHT BCCH HO | 3 |
| TIGHTBCCHHOLOADTHRES | Load Threshold for TIGHT BCCH HO | 80 |
| MAXRESEND | Max Resend Times of Phy.Info. | 30 |
| T3105 | T3105 | 7 |
| OutBscLoadHoEn | Inter BSC Load Information Allowed | NO |
| SDCCHWaitMREn | Waiting for MR on SDCCH Switch | OFF |
| SDCCHWaitMRTimeLen | Duration for Waiting MR on SDCCH | 10 |
| AssignBetterCellEn | Assigning Better Cell Allowed | OFF |
| ABCWaitMaxTime | Maximum Better Cell Assigning Duration | 40 |
| ABCUpQuality | Uplink Quality Threshold in Assigning Better Cell | 50 |
| ABCDownQuality | Downlink Quality Threshold in Assigning Better Cell | 50 |
| LOADHOAD | Enhanced Load HO Allowed | NO |
| LAYHOLOADTH | Inter-Layer HO Load Threshold | 0 |
| LOADHOUSRRATIO | HO Ratio of Enhanced Load HO Algorithm | 3 |